Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 111
link-bundle-utilization, mode
![]() |
View all Dell PowerSwitch S4128F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
link-bundle-utilization Configures link-bundle utilization. Syntax link-bundle-utilization trigger-threshold value Parameters value - Enter the percentage of port-channel bandwidth that triggers traffic monitoring on port-channel members (0 to 100). Default Disabled Command Mode CONFIGURATION Usage Information None Example OS10(config)# link-bundle-utilization trigger-threshold 10 Supported Releases 10.2.0E or later mode Configures a front-panel unified port group to operate in Fibre Channel or Ethernet mode, or a QSFP28-DD port to operate in Ethernet mode, with the specified speed on activated interfaces. Syntax Parameters mode {Eth {100g-2x | 100g-1x | 40g-2x | 40g-1x | 25g-8x [fabric-expander-mode] | 25g-4x | 10g-8x | 10g-4x} | FC {32g-2x | 32g-1x | 16g-4x | 16g-2x |8g-4x}} • mode Eth - Configure a port group in Ethernet mode and set the speed to: - 100g-2x - Split a QSFP28-DD port into two 100GE interfaces. - 100g-1x - Reset a QSFP28 port group to 100GE mode. - 40g-2x - Split a port group into two 40GE interfaces. - 40g-1x - Set a port group to 40G mode for use with a QSFP+ 40GE transceiver. - 25g-8x fabric-expander-mode - Split a QSFP28-DD port into eight 25GE interfaces for connection to a Fabric Expander. - 25g-8x - Split a port group into eight 25GE interfaces. - 25g-4x - Split a port group into four 25GE interfaces. - 10g-8x - Split a port group into eight 10GE interfaces. - 10g-4x - Split a port group into four 10GE interfaces. • mode FC - Configure a port group in Fibre Channel mode and set the speed to: - 32g-2x - Split a port group into two 32GFC interfaces, subports 1 and 3. - 32g-1x - Split a port group into one 32GFC interface, subport 1. - 16g-4x - Split a port group into four 16GFC interfaces; supports 4x32GFC oversubscription. - 16g-2x - Split a port group into two 16GFC interfaces using ports 1 and 3. - 8g-4x - Split a port group into four 8GFC interfaces. Default Command Mode Usage Information S4148U-ON: Depends on the port profile activated. PORT-GROUP • The mode {FC | Eth} command configures a port group to operate at line rate and guarantees no traffic loss. Interfaces 111
![](/manual_guide/products/dell-powerswitch-s3048on-os10-enterprise-edition-user-guide-release-10410-b76d862/111.png)