Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 697

• minimum-value - Enter the minimum threshold value for the specified color (1 to 12480). • maximum-value - Enter the maximum threshold value for the specified color (1 to 12480). • drop-rate - Enter the rate of drop precedence in percentage (0 to 100). Default Command Mode Usage Information Example Not configured WRED CONFIGURATION The no version of this command removes the WRED profile. OS10(config)# wred test_wred OS10(config-wred)# random-detect color green minimum-threshold 100 maximumthreshold 300 drop-probability 40 Supported Releases 10.4.0E(R1) or later random-detect ecn Enables Explicit Congestion Notification (ECN) for the WRED profile. Syntax Parameters Default Command Mode Usage Information Example random-detect ecn None Not configured WRED CONFIGURATION The no version of this command disables ECN. OS10(config)# wred test_wred OS10(config-wred)# random-detect ecn Supported Releases 10.4.0E(R1) or later random-detect ecn Enables Explicit Congestion Notification (ECN) for the system globally. Syntax Default Command Mode Usage Information random-detect ecn Not configured SYSTEM QOS The no version of this command disables ECN globally. NOTE: The function of this command to enable ECN globally is supported only on the S4200 platform. In the SYSTEM QOS mode, this command is not available on other platforms. Also, for S4200, ECN can be configured only per queue; you cannot configure ECN on an interface or a service pool. Example applicableOS10(config)# system-qos OS10(config-sys-qos)# random-detect ecn Supported Releases 10.4.1.0 or later Quality of service 697