Epson 5520W Users Guide - Page 158
Setting, Options, Description, Standby Mode, Communication On, Always On, HDBaseT
View all Epson 5520W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Setting Standby Mode HDBaseT (PowerLite 5520W/5530U/5535U) Options Communication On Communication Off Control Communications Extron XTP Description Enable this setting to allow the following operations to occur when the projector is in standby mode: • Monitor and control the projector over a network • Output audio and video to an external device (A/V Output must be set to Always On) • Communication from the HDBaseT port (Control Communications must be set to On) Selects the communication settings for connections to an HDBaseT transmitter or switcher Control Communications: enables or disables communication from the Ethernet and serial ports on the transmitter; turning on this setting disables the projector's LAN, RS232C, and Remote ports (Extron XTP must be turned off to use this setting) Extron XTP: set to On when you connect an Extron XTP transmitter or switcher to the HDBaseT port 158