Epson 5520W Users Guide - Page 56
Selecting Wireless Network Settings Manually, Run MPPLaunch.exe, Allow, Source Search
View all Epson 5520W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
2. Turn on the projector. 3. Press the LAN button on the remote control. You see the LAN standby screen. 4. Verify that an SSID and IP address are displayed. 5. Remove the wireless LAN module from the projector. 6. Insert the USB key into the same port used for the wireless LAN module. You see a projected message that the network information update is complete. 7. Remove the USB key. 8. Reinsert the wireless LAN module into the projector. 9. Insert the USB key into a USB port on your computer. Note: In Windows Vista, if you see the AutoPlay window, select Run MPPLaunch.exe, then select Allow on the next screen. 10. Follow the on-screen instructions to install the EasyMP Multi PC Projection software. Note: If you see a Windows Firewall message, click Yes to disable the firewall. You need administrator authority to install the software. If it is not installed automatically, double-click MPPLaunch.exe in the USB key. After a few minutes, your computer image is displayed by the projector. If it does not appear, press the LAN or Source Search button on your remote control or restart your computer. 11. Run your presentation as necessary. 12. When you finish projecting wirelessly, select the Safely Remove Hardware option in the Windows taskbar, then remove the USB key from your computer. Note: You can share the USB key with other computers without disconnecting your computer. You may need to restart your computer to reactivate your wireless LAN connection. Parent topic: Wireless Network Projection Selecting Wireless Network Settings Manually Before you can project from your wireless network, you must select the network settings for the projector using its menu system. 56