Epson 5520W Users Guide - Page 37
Connecting to a Component-to-BNC Video Source, If your video source has component video ports
View all Epson 5520W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2. Connect the other end to one of the projector's HDMI ports. Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers. Note: If you have problems hearing audio through the HDMI connection, you can use one of the projector's audio ports instead to play sound. Connect one end of an optional 3.5 mm stereo mini-jack audio cable to one of the projector's audio ports and the other end to your computer's audio out port. Then select the audio port you connected to as the HDMI1 Audio Output or HDMI2 Audio Output setting in the Extended menu. Parent topic: Connecting to Video Sources Related references Additional Components Projector Setup Settings - Extended Menu Connecting to a Component-to-BNC Video Source If your video source has component video ports, you can connect it to the projector using an optional component-to-BNC video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable. 1. Connect the component connectors to your video source's color-coded component video output ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable. 37