Epson 5520W Users Guide - Page 167
Event ID code, Cause and solution, setting in the Network menus.
View all Epson 5520W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Event ID code 0433 0434 0481 0482 0485 0483 04FE 0484 0479 04FF 0891 0892 0893 0894 0898 0899 089A 089C 089D Cause and solution Cannot display the transferred images. Restart the network software. Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again. The network software quit unexpectedly. Check the network communication status, then turn the projector off and then on again. Communication with computer was disconnected. Restart the network software. A projector system error has occurred. Turn the projector off and then on again. Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are correct. The TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct. Communication with unauthorized access point was disconnected. Contact your network administrator. Failed to acquire DHCP address. Make sure the DHCP server is operating correctly. If you are not using DHCP, turn off the DHCP setting in the Network menus. A communication error has occurred. Try restarting the EasyMP Network Projection program and restarting your projector. If that does not solve the problem, contact Epson for help. The EAP authentication type does not match the network. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. EAP server authentication failed. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. Key exchange failed. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. 167