Epson 5520W Users Guide - Page 38
Connecting to a Component Video Source, ports, usually labeled
View all Epson 5520W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
2. Connect the BNC connectors to the projector's R/Cr/Pr, G/Y, B/Cb/Pb ports. Parent topic: Connecting to Video Sources Related references Additional Components Connecting to a Component Video Source If your video source has component video ports, you can connect it to the projector using an optional component-to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable. 1. Connect the component connectors to your video source's color-coded component video output ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable. 38
38
2.
Connect the BNC connectors to the projector's
R/Cr/Pr
,
G/Y
,
B/Cb/Pb
ports.
Parent topic:
Connecting to Video Sources
Related references
Additional Components
Connecting to a Component Video Source
If your video source has component video ports, you can connect it to the projector using an optional
component-to-VGA video cable. Depending on your component ports, you may need to use an adapter
cable along with a component video cable.
1.
Connect the component connectors to your video source's color-coded component video output
ports, usually labeled
Y
,
Pb
,
Pr
or
Y
,
Cb
,
Cr
. If you are using an adapter, connect these connectors
to your component video cable.