Epson 5520W Users Guide - Page 188

On/Standby (power) light Off Status light Lamp light Flashing blue Orange Off Flashing Off blue Off Flashing Flashing blue orange Off Flashing Orange blue Temp light Off Off Flashing orange Orange Filter light Status and solution Off Orange Off Off Lamp has a problem. • Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Low air flow through the projector. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If the problem persists, unplug the projector and contact Epson for help. Auto Iris error. Turn off the projector, unplug it from the electrical outlet, and contact Epson for help Power error (balast) or Lens Shift error. Turn off the projector, unplug it from the electrical outlet, and contact Epson for help 188