Epson 5520W Users Guide - Page 189

On/Standby (power) light Flashing blue Status light Lamp light Varies Varies Flashing blue Varies Flashing orange Flashing blue Varies Varies Varies Varies Varies Temp light Flashing orange Varies Varies Varies Filter light Status and solution Varies Varies Orange Flashing orange High temperature warning. If the temperature gets too high, projection will automatically stop. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. The lamp is past its replacement period and needs to be replaced to avoid damage. Do not continue using the projector. Low air flow through the air filter. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If the problem persists, unplug the projector and contact Epson for help. It is time to clean the air filter. Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems Related concepts Air Filter and Vent Maintenance Projector Lamp Maintenance Related references Projector Setup Settings - Extended Menu Where to Get Help 189