Epson ActionLaser 1500 User Manual - Page 151
Removing the controller board, of
View all Epson ActionLaser 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Q WARNING: High voltages are present inside the printer when the power is on. Do not attempt to remove the controller board unless the printer is turned off and the power cord is unplugged. Also, try not to touch the contacts on the board because many of the components can be destroyed by the static electricity in your body. Removing the controller board 1. Turn off the printer and unplug the power cable from the electrical outlet. 2. Remove the optional card, cartridge, or lower paper cassette unit, if installed. 3. Disconnect all interface cables from the interface connectors. 4. Turn the printer so that its left side faces you. Use a cross-head screwdriver to remove the two screws securing the interface board cover. Then pull off the cover. Keep the screws handy so that you can use them later. Options 5-37