Epson ActionLaser 1500 User Manual - Page 181
Operating the printer as an HP LaserJet IllSi, Character dipping, Paper handling
View all Epson ActionLaser 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
In order to match your printing to the output produced on an HP LaserJet series IIP or III printer, you can use the T-OFFSET and L-OFFSET feature of the SYSTEM CONFIG. option in SelecType Level 1 to make fine adjustments to the print start position. However, because the offset feature can move the printing position to a point outside of the printable area, some of the data may not be printed. See Chapter 4 for more information on SelecType. Character dipping If a character is partially outside the printable area, the HP LaserJet clips it and the part outside of the printable area is not printed. Paper handling When using the printer in HP emulation, the paper size is not determined by the paper bin or cassette as it is with an HP LaserJet printer. Use the PAGE SIZE option in SelecType Level 1 to set any of the fourteen paper sizes supported by the printer. For certain nonstandard sizes of paper, you may need to use the single sheet feed option described in Chapter 2. Operating the printer as an HP LaserJet IllSi Your ActionLaser 1500 uses HP emulation to operate as an HP LaserJet IIISi. If your application software does not list the ActionLaser 1500 on its printer menu but does list the HP LaserJet IIISi, choose the LaserJet IIISi instead of the LaserJet III to take advantage of all of your printer's features. B-4 HP Emulation Mode