Epson BrightLink 450Wi User's Guide - Page 126
Solving Problems With the Image or Sound
View all Epson BrightLink 450Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
■ If nothing is projected after the drivers are installed, do one of the following: Windows: Select or Start > All Programs or Programs > EPSON Projector > EPSON USB Display > EPSON USB Display Vx.x. Mac OS: Click the USB Display icon in the Dock. If you don't see it, open the USB Display folder in the Applications folder and run USB Display. ■ Make sure USB Type B in the Extended menu is set to USB Display (see page 78). ■ In Windows, if the mouse pointer flickers, select All Programs or Programs > EPSON Projector > EPSON USB Display > EPSON USB Display Vx.x., then clear the Transfer layered window checkbox. Solving Problems With the Image or Sound No image appears on the screen. ■ Check that the Ppower light is green and not flashing. Also press the A/V Mute button on the remote control to make sure the picture has not been turned off temporarily. ■ The projector may be in standby or sleep mode. If the Ppower light is orange, press the Ppower button to turn the projector on. ■ If the power was switched off and then on again, the projector may be cooling down. Wait until the Ppower light stops flashing and remains orange; then press the Ppower button again. ■ The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer. ■ If you are projecting from a DVD player or other video source, make sure you turn it on and press its Play button. 126 Solving Problems