Epson BrightLink 450Wi User's Guide - Page 128
If you're using a PC notebook, If you're using Mac OS X, Mac OS X 10.6, Other versions of Mac OS X
View all Epson BrightLink 450Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
If you're using a PC notebook: ■ Press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CRT/LCD. You may have to hold down the Fn key while pressing it. Allow a few seconds for the projector to sync up after changing the setting. Check your notebook's manual or online help for details. On most systems, the key lets you toggle between the LCD screen and the projector, or display on both at the same time. ■ Depending on your computer's video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled. See your computer's documentation or online help for details. If you're using Mac OS X: 1. Open System Preferences. 2. Click Display or Displays. 3. Click Detect Displays. 4. Do one of the following: Mac OS X 10.6: Click Show displays in menu bar. Other versions of Mac OS X: Make sure the VGA Display or Color LCD dialog box is selected. Click the Arrangement or Arrange tab and make sure the Mirror Displays checkbox is selected. The message Not Supported is displayed. ■ Make sure the correct input signal is selected in the Signal menu (see page 73). ■ Make sure your computer's resolution and frequency or refresh rate is supported by the projector (see page 145). If necessary, change your computer's settings. 128 Solving Problems