Epson BrightLink 450Wi User's Guide - Page 88
To prevent the IP address from appearing on the standby screen, to return to the previous menu.
View all Epson BrightLink 450Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
■ If your network does not assign addresses automatically, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed. To enter numbers, use the arrow buttons on the remote control to select each number on the screen, then press the Enter button. When you're finished entering an address in the network menu, highlight Finish, then press the Enter button. 10. Press Esc to return to the previous menu. 11. To prevent the IP address from appearing on the standby screen, set the IP Address Display setting to Off. 12. When you're done making these changes, press Esc, select Complete and press Enter. Then select Yes and press Enter again to save your settings. Press Menu to exit the menu system. 88 Using the Projector on a Network