Epson BrightLink 450Wi User's Guide - Page 91

Using Quick Wireless Connection Using the optional Quick Wireless Connection USB key, you can connect the projector to a Windows computer wirelessly without any configuration. First, make sure you have installed the wireless module as described on page 89 and turned on the projector. 1. Connect the USB key to the projector's TypeA (flat) USB port. 2. When you see a projected message that the network information update is complete, remove the USB key. 3. Connect the USB key to a USB port on your computer or notebook. In Windows 7 or Windows Vista, if you see the AutoPlay window, select Run LaunchU3.exe. When you see the User Account Control screen, click Allow. 4. Follow the instructions on the screen to install the Quick Wireless Connection driver. If you see a Windows Firewall message, click Yes to disable the firewall. After a few moments, your computer image will be displayed through the projector. If not, try restarting your computer. 5. When you're done with your presentation, remove the USB key. You may need to restart your computer to reactivate your wireless interface. note Do not attempt to write to the USB key or use it as a flash memory drive. note The Quick Wireless Connection utility will disable any other wireless sessions and adapter programs. Make sure you leave the USB key in your computer for your entire Quick Wireless Connection session. Configuring Basic Settings You can give your projector a unique name, enable a projector keyword, or create a password for controlling the projector over the Web. 1. Press the Menu button, then choose Network and press Enter. 2. Choose Network Configuration and press Enter. Using the Projector on a Network 91