Epson BrightLink 450Wi User's Guide - Page 80
Starting the Projector With a Password, button and use the numeric keypad to enter
View all Epson BrightLink 450Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Hold down ■ Power On Protect: Prevents unauthorized use of the projector. After the projector is plugged in and turned on, you must enter a password to use the projector. Select On, press Enter, then press Esc to return to the Password Protect screen. ■ User's Logo Protect: Prevents your custom screen (see page 81), display, and User's Logo settings in the Extended menu from being changed. Select On, press Enter, then press Esc to return to the Password Protect screen. ■ Network Protect: Prevents any of the network settings from being changed. Select On, press Enter, then press Esc to return to the Password Protect screen. 3. Use the arrow buttons to select Password and press Enter. 4. When you see a message asking if you want to change the password, select Yes and press Enter. 5. Hold down the Num button and use the numeric keypad to enter a four digit password. 6. When you see a confirmation message, re-enter the password. 7. Press the Menu button, then press Enter to exit the screen. 8. Turn off and unplug the projector. note If you leave the projector plugged in, the Password screen will not appear. It appears only if you unplug and reconnect the power cord. Starting the Projector With a Password When the password function is enabled, you see this screen when you plug in and turn on the projector: Hold down the Num button and use the numeric keypad to enter the four digit password. 80 Using the Projector Menus