Epson R260 Service Manual - Page 108
Front Paper Guide Assy/APG Sensor Assy, Removing the PE Sensor Cable
![]() |
UPC - 010343859043
View all Epson R260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
EPSON Stylus Photo R260/R265/R270, R360/R380/R390 4.5.14 Front Paper Guide Assy/APG Sensor Assy C A U T IO N Do not touch the surface of the rubber roller of the EJ Roller Assy and the coated part of the PF Roller Assy as it can adversely affect the print quality. Parts/Components need to be removed in advance All exterior parts/components / All control boards / Middle Housing / Printer Mechanism / CR Scale / APG Unit / Printhead / Ink System / ASF Unit / Upper Paper Guide / CR Motor / EJ Frame Assy / PF Encoder / PF Scale / CR Unit Removal procedure CHECK P O IN T Refer to the Orientation Definition below for the directions indicated in the following procedures. •"4.1.6 Orientation Definition (p.61)" Removing the Front Paper Guide Assy 1. Remove the screw and remove the Parallelism Bushing L. • Screw : C.B.S. M3x8 (tightening torque: 6-8 kgf.cm) Parallelism Bushing L Front Paper Guide Assy Revision B 2. Disconnect the connector of the PE Sensor Cable on the rear side of the printer. 3. Remove the screw that secures the Front Paper Guide Assy. • Screw : C.B.S. M3x6 (tightening torque: 7-9 kgf.cm) Connector Front Paper Guide Assy PE Sensor Cable Figure 4-157. Removing the PE Sensor Cable 4. Pull out the EJ Ground Spring to the front side. Front Paper Guide Assy EJ Ground Spring Figure 4-158. Removing the EJ Ground Spring Figure 4-156. Removing the Parallelism Bushing L Disassembly/Assembly Disassembly of the Printer Mechanism 109
![](/manual_guide/products/epson-r260-service-manual-02311bf/108.png)