Epson R260 Service Manual - Page 77
Removing the Main Board Unit, remove the GND Cable of the USB Connector Cable CN2.
UPC - 010343859043
View all Epson R260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
EPSON Stylus Photo R260/R265/R270, R360/R380/R390 4.3.2 Removing the Main Board Unit Parts/Components need to be removed in advance All exterior parts/components / USB Board (R260/R265/R270 only) Removal procedure 1. Disconnect all FFCs and connector cables from the Main board. 2. Remove the all cables from the cable retainer on the Main Board. Cable Retainer Main Board Figure 4-51. Removing the Cables (R360/R380/R390 Main Board) CN16 CN15 CN14 CN1 CN12 CN10 CN9 CN8 CN7 CN5 CN11 CN6 CN4 CN3 CN13 Figure 4-52. R360/R380/R390 Main Board Revision B CHECK P O IN T For R260/R265/R270, when removing the connector cables, also remove the GND Cable of the USB Connector Cable (CN2). This GND Cable is screwed together with the Shield Plate in part . CN3 CN13 CN14 CN4 CN6 CN7 CN8 CN2 CN12 CN16 CN5 CN11 CN10 CN15 GND Cable USB Connector Cable (CN2) Figure 4-53. R260/R265/R270 Main Board Table 4-5. List of Connectors and their Destinations CN No. R360/R380/ R260/R265/ Color R390 R270 Destination Number of pins CN1 --- FFC Card Board 15pin --- CN2 White USB Board 5pin CN3 CN5 FFC Panel Board 8pin CN4 -- FFC Panel Board 11pin CN5 CN16 FFC CR Encoder 6pin CN6 CN8 FFC PF Encoder 6pin CN7 CN7 Black APG Sensor 3pin CN8 CN6 White PE Sensor 3pin CN9 CN4 White CDR Guide Detection Assy 4pin CN10 CN11 FFC Printhead 13pin CN11 CN10 FFC Printhead 13pin CN12 CN12 FFC Printhead 9pin CN13 CN15 FFC CSIC 13pin CN14 CN14 White CR Motor 2pin CN15 CN13 Black PF Motor 2pin CN16 CN3 White Power Supply 3pin Disassembly/Assembly Removing Control Boards 78