Epson R260 Service Manual - Page 91
EPSON Stylus Photo R260/R265/R270, R360/R380/R390, Revision B, Disassembly/Assembly, Disassembly of the Printer Mechanism
![]() |
UPC - 010343859043
View all Epson R260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
EPSON Stylus Photo R260/R265/R270, R360/R380/R390 3. Disconnect the FFC from the connector ( ) on the Head Board. FFC for CSIC Figure 4-96. Removing the FFC for CSIC 4. While disengaging the hook of the Head FFC Cover Inner with a flathead screw driver, slide the Head FFC Cover Inner upward and remove it. Head FFC Cover Inner Removal Direction Hook Screw Driver Figure 4-97. Removing the Head FFC Cover Inner 5. Move the CR Unit to its home position. 6. Insert a flathead screw driver through the hole on the right rear of the Main Frame, and disengage the hook (1) of the CSIC Assy. Hook (1) [Right rear side] Figure 4-98. Removing the CSIC Assy (1) Hook (1) Revision B 7. Move the CR Unit to the left (the opposite side to the home position). 8. Taking care not to scratch the cables, insert a flathead screw driver through the hole on the left rear of the Main Frame, and disengage the hook (2) of the CSIC Assy. Hook (2) Hook (2) [Left rear side] Figure 4-99. Removing the CSIC Assy (2) 9. Slide the CSIC Assy upward to remove it. Rear side of CSIC Assy Removal Direction CSIC Assy Hook Connector Figure 4-100. Removing the CSIC Assy (3) Disassembly/Assembly Disassembly of the Printer Mechanism 92
![](/manual_guide/products/epson-r260-service-manual-02311bf/91.png)