Epson R260 Service Manual - Page 46
Table 3-11., Troubleshooting for CDR Guide Error, 5.15 CDR, Guide Detection, Assyp.111, 5.6 Stacker
![]() |
UPC - 010343859043
View all Epson R260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
EPSON Stylus Photo R260/R265/R270, R360/R380/R390 Revision B Occurrence Timing When printing on CDs/DVDs Symptom Table 3-11. Troubleshooting for CDR Guide Error Failed Part Check Point 1. Is the CDR Guide Detection Assy cable not connected to the Main Board? CDR Guide Detection ASSY 2. Is the CDR Guide Sensor damaged? The CDR Guide is set correctly, but the error occurs. 3. Is the CDR Guide Detection Assy cable broken? 1. Is the CDR Guide Lever not installed correctly? CDR Guide Lever Main Board 1. Is there any chipped or broken elements on the Main Board? Remedy Reference 1. Connect the cable to the Main Board. R360/R380/R390 Main Board: CN9 R260/R265/R270 Main Board: CN4 2. Replace the CDR Guide Detection Assy. 4.5.15 "CDR Guide Detection Assy"(p.111) 3. Replace the CDR Guide Detection Assy. 1. Install the CDR Guide Lever correctly. 4.5.6 "Stacker Assy"(p.95) 1. Replace the Main Board. 4.3.2 "Removing the Main Board Unit"(p.78) Troubleshooting Troubleshooting by Error Message 47
![](/manual_guide/products/epson-r260-service-manual-02311bf/46.png)