Epson R260 Service Manual - Page 65
Front Cover, 4.2.4 Right Housing / Left Housing / USB Housing, EPSON Stylus Photo R260/R265/R270
UPC - 010343859043
View all Epson R260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
EPSON Stylus Photo R260/R265/R270, R360/R380/R390 Revision B 4.2.3 Front Cover Parts/Components need to be removed in advance: Nothing Removal procedure 1. Open the Front Cover. 2. Raise the CDR Guide Lever to lower the Stacker. 3. While pushing , disengage the left and right positioning holes of the Front Cover in that order, and remove the Front Cover. CDR Guide Lever Positioning Hole (right) Positioning Hole (left) Stacker Front Cover Figure 4-15. Removing the Front Cover (1) 4.2.4 Right Housing / Left Housing / USB Housing Parts/Components need to be removed in advance: Nothing Removal procedure Removing Right/Left Housings 1. Remove the two screws. • Screw : C.B.P. M3x10 (tightening torque: 5-7 kgf.cm) [Rear side] Right Housing Left Housing Figure 4-16. Removing the Right/Left Housings (1) 2. Insert a metal straightedge into the slit (ventilating opening) on the Right Housing and disengage the hook. 3. While pushing , disengage the two tabs, and slide the Right Housing rearward to remove it. (Refer to Fig.4-18) Push Disassembly/Assembly Removal Direction [Right side] : Tab : Hook Figure 4-17. Removing the Right/Left Housings (2) Removing Exterior Parts/Components 66