Epson R260 Service Manual - Page 120
PF Adjustment
![]() |
UPC - 010343859043
View all Epson R260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
EPSON Stylus Photo R260/R265/R270, R360/R380/R390 5.2.5 PF Adjustment PF-Standard Area Patterns are printed as shown below. 5 4 3 2 1 0 -1 -2 -3 -4 -5 Figure 5-6. PF adjustment (Standard Area) Pattern Printing [Judgment method] Input the value shown above the patterns which has no gap between the upper pattern and the lower pattern, and also the both upper and lower patterns do not overlap each other. The diagram below shows the OK and NG patterns. PF-Bottom Edge Area Patterns are printed as shown below. -3 Upper block -2 -1 0 Revision B 1 23 Lower block Figure 5-7. PF adjustment (Bottom Edge Area) Pattern Printing [Judgment method] Input the value shown above the patterns which has no gap between the upper pattern and the lower pattern, and also the both upper and lower patterns do not overlap each other. Example: In the above figure, patterns below "0" has no gap and overlap, so input "0". [Corrective action] In case that all patterns have gap or overlap, choose the pattern which has the least gap or overlap, and print the pattern again after inputting the value. The diagram below shows the OK and NG patterns. Overlap Gap NG OK NG NG OK NG Adjustment Adjustment by Using Adjustment Program 121
![](/manual_guide/products/epson-r260-service-manual-02311bf/120.png)