Epson R260 Service Manual - Page 67
Upper Housing, Removing the Upper Housing 2
![]() |
UPC - 010343859043
View all Epson R260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
EPSON Stylus Photo R260/R265/R270, R360/R380/R390 4.2.5 Upper Housing Parts/Components need to be removed in advance Paper Support / Printer Cover / Front Cover / Right Housing / Left Housing / USB Housing Removal procedure 1. Remove eight screws. • Screw : C.B.P. M3x10 (tightening torque: 5-7 kgf.cm, silver) • Screw : C.B.P. M3x10 (tightening torque: 5-7 kgf.cm, black) • Screw : C.B.P. M3x10 (tightening torque: 5-7 kgf.cm, black, diagonally mounted) (The numbers shown in the figure indicate the order of tightening the screws.) 1 8 2 Upper Housing 6 75 3 4 Figure 4-21. Removing the Upper Housing (1) 2. Pull the left and right of the Upper Housing to disengage the two positioning holes of the housing from the guide pins of the Lower Housing, and remove the Upper Housing avoiding contact wit the ASF Unit. [Left side] Bushing Upper Housing Revision B Be careful not to let the cables get caught under the Upper Housing at the position indicated with in Fig.4-22. Tighten the screws in the order given in Fig.4-21. (6), (7), (8) screws are black, and (6), (7) screws are mounted diagonally toward the rear side of the printer. Keep that in mind when removing/attaching the screws. Positioning Hole Removal Direction Figure 4-22. Removing the Upper Housing (2) Disassembly/Assembly Removing Exterior Parts/Components 68
![](/manual_guide/products/epson-r260-service-manual-02311bf/67.png)