Epson WorkForce WF-2630 User Manual - Page 113
The Printout Problem Could Not be Cleared, Printing Is Too Slow, Cannot Start Scanning
View all Epson WorkForce WF-2630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
User's Guide Solving Problems The Printout Problem Could Not be Cleared If you have tried all of the solutions and have not solved the problem, try uninstalling and then reinstalling the printer driver. Related Information & "Uninstalling Applications" on page 99 & "Installing Applications" on page 100 Printing Is Too Slow ❏ When printing continuously for approximately more than 10 minutes, printing slows down to prevent the printer mechanism from overheating and being damaged. However, you can continue printing. To return the PRELIMINARY printer to normal printing speed, cancel printing, and leave the printer idle for at least 30 minutes with the power on. The printer does not recover if the power is off. ❏ Close any unnecessary applications. ❏ Lower the quality setting on the control panel or the printer driver. High quality printing slows down the printing speed. ❏ Enable the bidirectional (or high speed) setting. When this setting is enabled, the print head prints while moving in both directions, and the printing speed increases. ❏ Windows Select High Speed on the printer driver's More Options tab. ❏ Mac OS X Select System Preferences from the menu > Printers & Scanners (or Print & Scan, Print & Fax), and then select the printer. Click Options & Supplies > Options (or Driver). Select On as the High Speed Printing setting. ❏ Disable quiet mode. This feature slows down the printing speed. ❏ Windows Select Off as the Quiet Mode setting on the printer driver's Main tab. ❏ Mac OS X Select System Preferences from the menu > Printers & Scanners (or Print & Scan, Print & Fax), and then select the printer. Click Options & Supplies > Options (or Driver). Select Off as the Quiet Mode setting. Cannot Start Scanning ❏ If you are scanning with the ADF, check that the document cover and ADF cover are closed. ❏ Connect the interface cable securely to the printer and the computer. ❏ If you are using a USB hub, connect the printer directly to the computer. ❏ When using the printer on a network, make sure the printer is connected to the network properly. You can check the connection status from the network icon on the printer window and by printing a network status sheet. If the printer is not connected to the network, see the Network Guide. 113