Fujitsu FPCM11384 User Manual - Page 102

Acoustic error messages, Error messages on the screen

Page 102 highlights

Troubleshooting and tips Acoustic error messages Cause A beep sounds every few seconds The battery is almost flat. Troubleshooting ► Charge the battery. Error messages on the screen This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programmes are described in the relevant documentation. If the error message appears repeatedly, despite troubleshooting measures, please i contact the place of purchase or our customer service centre. Error message/cause Troubleshooting CMOS Battery Bad If the error message occurs repeatedly, the buffer battery in the notebook is flat. ► Please contact your sales outlet or our customer service centre. System CMOS checksum bad - ► Switch the notebook off. Default configuration used ► Switch the notebook on. The system configuration information is incorrect. ► Enter the BIOS Setup by pressing F2 . ► Select the Exit menu in the BIOS Setup. ► Select the entry Load Setup Defaults. ► Select OK and press the Enter key. Extended memory failed at ► Check whether the additional memory module has offset: xxxx Failing Bits: been inserted correctly. zzzz zzzz When testing the extended memory an error has resulted at the address xxxx. Failure Fixed Disk n ► The settings of the hard disk drive are incorrect. Start the BIOS Setup (Primary Master submenu) and select the correct settings. Keyboard controller error ► Switch the notebook off with the ON/OFF switch. ► Wait 3 to 5 seconds and switch the notebook back 92 A26391-K220-Z227-1-7619, edition 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

Troubleshooting and tips
92
A26391-K220-Z227-1-7619, edition 1
Acoustic error messages
Cause
Troubleshooting
A beep sounds every few seconds
The battery is almost flat.
Charge the battery.
Error messages on the screen
This section describes the error messages generated by the
BIOS Setup
. Error messages displayed
by the operating system or programmes are described in the relevant documentation.
i
If the error message appears repeatedly, despite troubleshooting measures, please
contact the place of purchase or our customer service centre.
Error message/cause
Troubleshooting
CMOS Battery Bad
If the error message occurs
repeatedly, the buffer battery in the
notebook is flat.
Please contact your sales outlet or our customer
service centre.
System CMOS checksum bad –
Default configuration used
The system configuration information
is incorrect.
Switch the notebook off.
Switch the notebook on.
Enter the
BIOS Setup
by pressing
F2
.
Select the
Exit
menu in the
BIOS Setup
.
Select the entry
Load Setup Defaults
.
Select
OK
and press the Enter key.
Extended memory failed at
offset: xxxx
Failing Bits:
zzzz zzzz
When testing the extended memory
an error has resulted at the address
xxxx.
Check whether the additional memory module has
been inserted correctly.
Failure Fixed Disk n
The settings of the hard disk drive are
incorrect.
Start the
BIOS Setup
(
Primary Master
submenu) and
select the correct settings.
Keyboard controller error
Switch the notebook off with the ON/OFF switch.
Wait 3 to 5 seconds and switch the notebook back