Fujitsu FPCM11384 User Manual - Page 98
The printer does not print, The notebook shuts down suddenly
![]() |
View all Fujitsu FPCM11384 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Troubleshooting and tips The printer does not print Cause Printer not ready-for-use Troubleshooting ► Make sure that the printer is switched on and is online (see the manuals supplied with the printer). Data line interrupted between notebook and printer ► Check that the cable connecting the notebook and the printer is connected properly. Wrong print driver installed ► Check that the correct printer driver is installed. The notebook shuts down suddenly Cause Troubleshooting If you are operating the notebook with ► a battery, you may have overlooked the reference to the low battery level ► and the notebook has switched over to Standby mode. Connect the mains adapter. Press the ON/OFF switch. A component (e.g. optical drive) is not detected or is not ready Cause The component has been deactivated. Troubleshooting ► Check whether the component has been deactivated with the Eco Utility (if installed). ► Re-activate the component. The wireless components are not available Cause Troubleshooting The wireless components have been ► Check whether the wireless components have been deactivated. deactivated with the Wireless Selector (if installed). ► Re-activate the wireless components. 88 A26391-K220-Z227-1-7619, edition 1
![](/manual_guide/products/fujitsu-fpcm11383-user-manual-d4a727e/98.png)