Gateway E-475M Gateway Notebook Reference Guide (Windows XP) - Page 69
Recalibrating the battery(ies - bios
View all Gateway E-475M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
www.gateway.com Recalibrating the battery(ies) Important Do not interrupt the battery recalibration process. If recalibration is interrupted, you must start the process over again. If your notebook unexpectedly goes into Standby mode while you are using it but the battery charge is not low, you may need to recalibrate your battery(ies). You should also recalibrate the battery(ies) periodically to maintain the accuracy of the battery gauges. To recalibrate the battery(ies): 1 Connect the AC adapter, then turn on your notebook. 2 As soon as it starts and you see a startup screen, press F2. The BIOS Setup utility opens. 3 Open the Advanced menu. 4 Highlight Battery Auto Learning, then select Enabled by pressing the spacebar. 5 Open the Exit menu, highlight Exit Saving Changes, then press ENTER. 6 Select Yes, then press ENTER. The battery recalibration process begins and a screen opens showing you the progress. The entire process takes several hours. When the recalibration has finished, the message "Press [Esc] key to exit" appears. 7 Press ESC. The battery charge indicator now displays an accurate battery charge. Important If, after completing this procedure, the battery charge indicator still does not show an accurate charge, contact Gateway Customer Care at the location shown on the Customer Care label. For more information, see "Gateway contact information" on page 3. 61