HP 4500 HP Color LaserJet 4500, 4500N, 4500DN Printer User Guide - Page 104

Configuring the Printer for the Network at the Pri...

Page 104 highlights

Configuring the Printer for the Network at the Printer Control Panel You might need to configure certain network parameters on the printer. You can configure these parameters from the printer control panel or, for most networks, from the HP JetAdmin software (or the HP LaserJet Utility for Macintosh). The utilities are provided on the printing software CD-ROM that comes with the printer. For a complete list of supported networks and for instructions on configuring network parameters from software such as the HP JetAdmin software, see the HP JetDirect Print Server Software Installation Guide. The guide comes with printers in which an HP JetDirect print server is installed. This section contains the following instructions for configuring network parameters from the printer control panel: q Configuring Novell NetWare Frame Type Parameters q Configuring TCP/IP Parameters q Configuring the Apple EtherTalk Phase Parameters q Disabling Unused Network Protocols Configuring Novell NetWare Frame Type Parameters The HP JetDirect print server automatically selects a NetWare frame type. Select a frame type manually only when the print server selects an incorrect frame type. To identify the frame type chosen by the HP JetDirect print server, print a configuration page. 104 Printer Interfaces EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220

104
Printer Interfaces
EN
Configuring the Printer for the Network
at the Printer Control Panel
You might need to configure certain network parameters on the
printer. You can configure these parameters from the printer control
panel or, for most networks, from the HP JetAdmin software (or the
HP LaserJet Utility for Macintosh). The utilities are provided on the
printing software CD-ROM that comes with the printer.
For a complete list of supported networks and for instructions on
configuring network parameters from software such as the
HP JetAdmin software, see the
HP JetDirect Print Server Software
Installation Guide
. The guide comes with printers in which an
HP JetDirect print server is installed.
This section contains the following instructions for configuring
network parameters from the printer control panel:
Configuring Novell NetWare Frame Type Parameters
Configuring TCP/IP Parameters
Configuring the Apple EtherTalk Phase Parameters
Disabling Unused Network Protocols
Configuring Novell NetWare Frame Type
Parameters
The HP JetDirect print server automatically selects a NetWare frame
type. Select a frame type manually only when the print server selects
an incorrect frame type. To identify the frame type chosen by the
HP JetDirect print server, print a configuration page.