HP 4500 HP Color LaserJet 4500, 4500N, 4500DN Printer User Guide - Page 37

I/O Menu The I/O Menu allows you to make changes to printer interface settings. The following table lists the selections that appear for each item in this menu. (See chapter 6 for additional information.) Menu Item I/O TIMEOUT Values 5 to 300 SECONDS (default: 15) I/O BUFFER I/O BUFFER SIZE1 PARALLEL HIGH SPEED AUTO* OFF ON nnnnnnK (default: 100K) YES* NO PARALLEL ADV FUNCTIONS ON* OFF *Denotes default setting 1Only appears if I/O BUFFER is ON Description Amount of time the printer waits to receive data before switching to another port. Allocates memory to I/O ports. Amount of memory allocated to the I/O ports. Allows faster parallel communications supported by newer computers. Turns bidirectional parallel communication on and off. EIO Menu If an Enhanced Input Output (EIO) card (for example, an HP JetDirect Print Server) has been installed in the printer, an additional menu is available. This additional menu provides a way to configure the EIO accessory and to adjust network interface settings. For information on HP JetDirect EIO menus, see the HP JetDirect Print Server Software Installation Guide. This guide is included with the HP Color LaserJet 4500 N and 4500 DN printers and is also available through HP Direct. (For ordering information, see Appendix D.) EN Chapter 2 37