HP 4500 HP Color LaserJet 4500, 4500N, 4500DN Printer User Guide - Page 107

To con Apple EtherTalk parameters from the, printer control panel, until HP EIO 1 MENU displays.

Page 107 highlights

9 If you keep BOOTP=YES *, the values for the TCP/IP parameters will be provided by the BOOTP file, RARP, or DHCP and no other TCP/IP configuration is necessary. Skip to step 17. - OR - Press VALUE to change the value of the BOOTP= parameter. BOOTP=NO displays. 10 Press SELECT to save the selection. BOOTP=NO * appears, and you are prompted to configure each of the TCP/IP parameters. 11 Press ITEM to continue configuring. IP BYTE 1=> * displays. 12 Press VALUE until the value of the first byte of the IP address displays. 13 Press SELECT to save the value. 14 Repeat steps 12 and 13 to configure the remaining bytes of the IP address. 15 Press ITEM to continue. 16 Repeat steps 12-15 to configure the subnet mask bytes (SM), default gateway (GW), and timeout (TIMEOUT). 17 If you are finished, press GO to return the printer to the READY state. - OR - See the appropriate sections for other protocols that will be used. To configure Apple EtherTalk parameters from the printer control panel 1 Press MENU until HP EIO 1 MENU displays. 2 Press ITEM until CFG NETWORK=NO * displays. 3 Press VALUE until CFG NETWORK=YES displays. 4 Press SELECT once. CFG NETWORK=YES * displays. EN Chapter 6 107

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220

EN
Chapter 6
107
9
If you keep BOOTP=YES *, the values for the TCP/IP parameters
will be provided by the BOOTP file, RARP, or DHCP and no other
TCP/IP configuration is necessary. Skip to step 17.
– OR –
Press
V
ALUE
to change the value of the BOOTP= parameter.
BOOTP=NO displays.
10
Press
S
ELECT
to save the selection. BOOTP=NO * appears, and
you are prompted to configure each of the TCP/IP parameters.
11
Press
I
TEM
to continue configuring. IP BYTE 1=<value>> *
displays.
12
Press
V
ALUE
until the value of the first byte of the IP address
displays.
13
Press
S
ELECT
to save the value.
14
Repeat steps 12 and 13 to configure the remaining bytes of the IP
address.
15
Press
I
TEM
to continue.
16
Repeat steps 12-15 to configure the subnet mask bytes (SM),
default gateway (GW), and timeout (TIMEOUT).
17
If you are finished, press
G
O
to return the printer to the READY
state.
– OR –
See the appropriate sections for other protocols that will be used.
To configure Apple EtherTalk parameters from the
printer control panel
1
Press
M
ENU
until HP EIO 1 MENU displays.
2
Press
I
TEM
until CFG NETWORK=NO * displays.
3
Press
V
ALUE
until CFG NETWORK=YES displays.
4
Press
S
ELECT
once. CFG NETWORK=YES * displays.