HP 4500 HP Color LaserJet 4500, 4500N, 4500DN Printer User Guide - Page 35
Configuration Menu, need to be changed. - power save mode
View all HP 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
CAUTION Configuration Menu The Configuration Menu is used to set general printer default settings. Hewlett-Packard recommends that configuration settings only be changed by a system administrator. Configuration settings seldom need to be changed. Menu Item POWERSAVE PERSONALITY CLEARABLE WARNINGS AUTO CONTINUE Values OFF 1 MIN (used for troubleshooting) 30 MIN 1 HR* 2 HRS 4 HRS 8 HRS AUTO* PCL PS JOB* ON ON* OFF TONER LOW CONTINUE* STOP TONER OUT STOP* OVERRIDE JAM RECOVERY PRINT PS ERRORS OFF* ON OFF* ON *Denotes default setting Description The length of time before the printer goes into power-saving mode. The personality (language) the printer uses to process a print job. If ON, message is displayed until GO is pressed. If JOB, message is displayed until end of print job. Determines whether the printer continues printing when certain errors occur. If ON, printer returns to the READY state. If OFF, printer remains offline until GO is pressed. Determines whether the printer continues or stops printing when a TONER LOW condition is detected. Determines whether the printer continues printing when GO is pressed after a TONER OUT condition is detected. Printer attempts to recover from jams and reprints affected pages. Prints out an error page when emulated PostScript errors occur. EN Chapter 2 35