HP 5200tn HP LaserJet 5200L Series Printer - User Guide - Page 121
Tray size cannot be ANY SIZE/ANY, CLOSE TOP COVER AND FRONT DOOR - tray 3 rollers
UPC - 882780123762
View all HP 5200tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Control panel message Description Recommended action Tray size cannot be ANY SIZE/ANY CUSTOM BAD DUPLEXER CONNECTION The duplexer is not installed correctly. Turn the printer off and then on to continue. alternates with To continue turn off then on Calibrating... The printer is calibrating. No action necessary. Canceling... The printer is in the process of canceling a job. The message appears while the job is stopped, the paper path is flushed, and any remaining incoming data on the active data channel is received and discarded. No action necessary. Checking paper path The engine is turning the rollers to check for No action necessary. possible jams. Checking printer The engine is performing an internal test. No action necessary. CHOSEN PERSONALITY NOT AVAILABLE alternates with The printer encountered a request for a personality that did not exist in the printer. The job is cancelled and no pages are printed. 1. Press to continue. 2. Try a different driver. To continue press CLEANING DISK X% COMPLETE alternates with DO NOT POWER OFF The memory disk is being cleaned. This process might take up to an hour. During this time, no jobs can be printed. Do not turn off the printer. Wait for the process to complete. The printer automatically restarts at the end of the cleaning process. Cleaning... The printer is processing the cleaning page. No action necessary. Clearing event log This message appears while the event log is No action necessary. cleared. The printer then returns to the SERVICE menu. Clearing paper path The printer jammed or detected misplaced No action necessary. media. The printer is attempting to eject these pages automatically. CLOSE TOP COVER AND FRONT DOOR The top cover and front door need to be closed. Close the top cover and front door. CODE CRC ERROR An error has occurred during a firmware upgrade. 1. Reinstall the firmware. 2. If the problem persists, contact HP Support. Creating...CLEANING PAGE The printer is generating a cleaning page. The printer returns to the Ready state after the cleaning page is printed. 1. Load the cleaning page into tray 1. 2. Press Menu. 3. Select PRINT QUALITY, and then press . 4. Select PROCESS CLEANING PAGE, and then press . ENWW Control-panel messages 109