HP 5200tn HP LaserJet 5200L Series Printer - User Guide - Page 174
Label construction, Transparencies
UPC - 882780123762
View all HP 5200tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Label construction When selecting labels, consider the quality of each component: ● Adhesives: The adhesive material should be stable at 200°C (392°F), which is the printer fusing temperature. ● Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing serious jams. ● Curl: Prior to printing, labels must lie flat with no more than 13 mm (0.5 in) of curl in any direction. ● Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. For more information, see Printing on labels on page 61. NOTE: Choose labels in the printer driver (see Printer drivers on page 7). Transparencies Transparencies used in the printer must be able to withstand 200°C (392°F), which is the printer fusing temperature. CAUTION: To avoid damaging the printer, use only transparencies recommended for use in HP LaserJet printers, such as HP-brand transparencies. (For ordering information, see Part numbers on page 145.) For more information, see Printing on transparencies on page 61. NOTE: Choose transparencies in the printer driver (see Printer drivers on page 7). 162 Appendix C Specifications ENWW