HP 5200tn HP LaserJet 5200L Series Printer - User Guide - Page 66
Customizing tray 1 operation, the front door when the printer is printing.
UPC - 882780123762
View all HP 5200tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3. Slide the media-width guides slightly wider than the media. 4. Place media into the tray (short-edge in, print-side up). The media should be centered between the media-width guides and under the tabs on the media-width guides. 5. Slide the media-width guides inward until they lightly touch the media stack on both sides without bending it. Make sure that the media fits under the tabs on the media-width guides. NOTE: Do not add media to tray 1 while the printer is printing. This could cause a jam. Do not close the front door when the printer is printing. Customizing tray 1 operation The printer can be set to print from tray 1 if it is loaded, or to print only from tray 1 if the type of media that is loaded is specifically requested. See Paper Handling menu on page 23. 54 Chapter 4 Printing tasks ENWW