HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 129
Switch Priority, Disabled, spanning-tree priority < priority-multiplier >
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Multiple Instance Spanning-Tree Operation Configuring MSTP Syntax: spanning-tree priority < priority-multiplier > Every switch running an instance of MSTP has a Bridge Identifier, which is a unique identifier that helps distinguish this switch from all others. The switch with the lowest Bridge Identifier is elected as the root for the tree. The Bridge Identifier is composed of a configurable Priority component (2 bytes) and the bridge's MAC address (6 bytes). The ability to change the Priority component provides flexibility in determining which switch will be the root for the tree, regardless of its MAC address. This command sets the switch (bridge) priority for the designated region in which the switch resides. The switch compares this priority with the priorities of other switches in the same region to determine the root switch for the region. The lower the priority value, the higher the priority. (If there is only one switch in the region, then that switch is the root switch for the region.) The root bridge in a region provides the path to connected regions for the traffic in VLANs assigned to the region's IST instance. (Traffic in VLANs assigned to a numbered STP instance in a given region moves to other regions through the root switch for that instance.) The priority range for an MSTP switch is 0-61440. However, this command specifies the priority as a multiplier (0 - 15) of 4096. That is, when you specify a priority multiplier value of 0 - 15, the actual priority assigned to the switch is: (priority-multiplier) x 4096 For example, if you configure "2" as the priority-multiplier on a given MSTP switch, then the Switch Priority setting is 8,192. Note: If multiple switches in the same MST region have the same priority setting, then the switch with the lowest MAC address becomes the root switch for that region. Syntax: spanning-tree trap errant-bpdu Enables SNMP traps for errant-BPDUs. Note that this command is designed to be used in conjunction with the spanning-tree bpdu-filter command (see page 4-30) and bpdu-protection command (see page 4-31). The no form of the command disables traps on the switch. (Default: Disabled.) 4-25