HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 151

Multiple Instance Spanning-Tree Operation Configuring MSTP How to Save Your Current Configuration You can save your current configuration before updating to a new version of software by following these steps: 1. Enter the show config files command to display your current configura- tion files, as shown in Figure 4-12. ProCurve(config)# show config files Configuration files: id | act pri sec | name 1 | * * * | config1 2 | | config2 3 | | Figure 4-12. An Example of the show config files Command Output 2. To save a configuration file for software version Z.12.43, enter this command: ProCurve(config)# copy config config1 config configZ1243.cfg You can choose any name for the saved configuration file that you prefer. 3. Display the configuration files as shown in Figure 4-13. You will see your newly created configuration file listed. ProCurve(config)# show config files Configuration files: id | act pri sec | name 1 | * * * | config1 2 | | config2 3 | | configK1243.cfg Figure 4-13. A Config File for the Current Software Version is Created 4. Now update your switch to the desired version, for example, Z.12.51. Enter the show flash command to see the results. The switch is now running the software version Z.12.51. 4-47