HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 54

Static Virtual LANs (VLANs) Configuring VLANs VLAN Commands show vlans show vlans < vid > show vlans ports max-vlans HP 6120G/XG HP 6120XG primary-vlan < vid > [no] vlan < vid > auto < port-list > forbid name < vlan-name > protocol < protocol-list > tagged < port-list > untagged < port-list > voice static-vlan < vlan-id > Page below 2-33 2-35 2-35 2-37 2-39 (Available if GVRP enabled.) 2-39 2-39 2-37 2-39 2-39 2-56 2-39 (Available if GVRP enabled.) Displaying the Switch's VLAN Configuration. The show vlans command lists the VLANs currently running in the switch, with VID, VLAN name, and VLAN status. Dynamic VLANs appear only if the switch is running with GVRP enabled and one or more ports has dynamically joined an advertised VLAN. (In the default configuration, GVRP is disabled. (Refer to chapter 3, "GVRP" .) Syntax: show vlans Maximum VLANs to support: Shows the number of VLANs the switch can currently support. (Default: 256 Maximum for HP 6120G/XG = 256; Maximum for HP 6120XG = 1024) Primary VLAN: Refer to "The Primary VLAN" on page 2-47. Management VLAN: Refer to "The Secure Management VLAN" on page 2-48. 802.1Q VLAN ID: The VLAN identification number, or VID. Refer to "Terminology" on page 2-6. 2-28