HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 19
Fabric setup commands, allowed-domain-id
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Default A VFC interface is up. Views VFC interface view Predefined user roles network-admin Examples # Bring up interface VFC 1. system-view [Sysname] interface vfc 1 [Sysname-Vfc1] undo shutdown Fabric setup commands allowed-domain-id Use allowed-domain-id to specify the allowed domain ID list for a specific VSAN on the switch. Use undo allowed-domain-id to restore the default. Syntax allowed-domain-id domain-id-list undo allowed-domain-id domain-id-list Default The default setting is 1 to 239. Views VSAN view Predefined user roles network-admin Parameters domain-id-list: Specifies a list of allowed domain IDs, in the format of domain-id-list = { domain-id1 [ to domain-id2 ] }&, where domain-id1 and domain-id2 specify domain IDs in the range of 1 to 239 and domain-id2 must be no smaller than domain-id1. & indicates that you can specify up to eight domain-id1 [ to domain-id2 ] parameters. Usage guidelines Each FCF switch is assigned a domain ID. You can specify the allowed domain ID list. Configuring the allowed domain ID list has an effect on switches as follows: • Principal switch-Can only assign domains IDs within the allowed domain ID list. If the allowed domain ID list configured does not include any of the already assigned domain IDs or manually configured domain IDs, the configuration will fail. • Non-principal switch-The manually configured domain ID must be within the allowed domain ID list. Otherwise, the configuration will fail. The principal switch must assign the switch a domain ID 14