HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 85
NPV commands, display npv login
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
• zoneset name NPV commands display npv login Use display npv login to display the nodes on downlink interfaces and their mapped uplink interfaces. Syntax display npv login [ vsan vsan-id ] [ interface interface-type interface-number ] display npv login [ vsan vsan-id ] count Views Any view Predefined user roles network-admin network-operator Parameters vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If no VSAN is specified, this command displays the nodes of all VSANs on an NPV switch. interface interface-type interface-number: Specifies a downlink interface by its type and number. If no downlink interface is specified, this command displays the nodes on all downlink interfaces on an NPV switch. count: Displays the number of logged-in nodes on an NPV switch. Usage guidelines This command is available only when the switch is operating in NPV mode. Examples # Display the nodes on downlink interfaces and their mapped uplink interfaces on an NPV switch. display npv login Server External Interface VSAN FCID Port WWN Node WWN Interface Vfc1 1 0xae0003 10:00:00:00:c9:66:6b:60 20:00:00:00:c9:66:6b:60 Vfc2 # Display the number of logged-in nodes on the NPV switch. display npv login vsan 1 count Total entries: 2 Table 25 Command output Field Server Interface External interface FCID Port WWN Description Name of the downlink interface. Name of the uplink interface mapped by the downlink interface. FC address of the node. Port WWN of the node connected to the NPV switch. 80