HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 39
timer error-detect
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Views VSAN view Predefined user roles network-admin Parameters value: Distributed service timeout period in the range of 5000 to 10000 milliseconds. Usage guidelines The distributed service timeout period can be configured in system view or VSAN view: • The configuration made in system view takes effect on all VSANs. The configuration made in VSAN view takes effect only on the current VSAN. • If you configure the distributed service timeout period globally and for the specified VSAN at the same time, the configuration for the VSAN is given priority. Examples # Set the distributed service timeout period to 6000 milliseconds for VSAN 1. system-view [Sysname] vsan 1 [Sysname-vsan1] timer distributed-services 6000 Related commands fc timer distributed-services timer error-detect Use timer error-detect to specify the error detection timeout period for a specified VSAN. Use undo timer error-detect to restore the default. Syntax timer error-detect value undo timer error-detect Default The error detection timeout period is 2000 milliseconds. Views VSAN view Predefined user roles network-admin Parameters value: Error detection timeout period in the range of 1000 to 10000 milliseconds. Usage guidelines The error detection timeout period can be configured in system view or VSAN view: • The configuration made in system view takes effect on all VSANs. The configuration made in VSAN view takes effect only on the current VSAN. 34