HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 30
domain con enable, domain restart, Examples, Related commands, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Examples # Enable the auto fabric reconfiguration function for the switch in VSAN 1. system-view [Sysname] vsan 1 [Sysname-vsan1] domain auto-reconfigure enable Related commands domain configure enable domain configure enable Use domain configure enable to enable the fabric configuration function for the switch in a specified VSAN. Use undo domain configure enable to disable the fabric configuration function for the switch in a specified VSAN. Syntax domain configure enable undo domain configure enable Default The fabric configuration function is enabled in each VSAN. Views VSAN view Predefined user roles network-admin Usage guidelines After being enabled with the fabric configuration function, FCF switches exchange messages to select the principal switch. Then, the principal switch dynamically assigns domain IDs to all switches in the fabric. Therefore, to dynamically build a fabric, you must enable the fabric configuration function on switches. To statically set up a fabric, you must disable the fabric configuration function on switches and manually configure domain IDs for the switches. Examples # Enable the fabric configuration function for the switch in VSAN 1. system-view [Sysname] vsan 1 [Sysname-vsan1] domain configure enable domain restart Use domain restart to configure the switch to initiate a fabric reconfiguration in a specified VSAN. Syntax domain restart [ disruptive ] 25