HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 43
vsan, vsan-id-list, vsan-id1
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Parameters vsan-id-list: Specifies a list of VSANs, in the format of vsan-id-list = { vsan-id1 [ to vsan-id2 ] }&, where vsan-id is in the range of 1 to 3839 and & indicates that you can specify up to 10 vsan-id1 [ to vsan-id2 ] parameters. Examples # Assign interface VFC1 to VSANs 1, 2, 10, and 20 through 100. system-view [Sysname] interface vfc 1 [Sysname-Vfc1] port trunk vsan 1 to 2 10 20 to 100 vsan Use vsan to create a VSAN and enter VSAN view. If the VSAN already exists, you directly enter VSAN view. Use undo vsan to delete a VSAN. Syntax vsan vsan-id undo vsan vsan-id Default Only the default VSAN (VSAN 1) exists. Views System view Predefined user roles network-admin Parameters vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. Usage guidelines You cannot create or delete VSAN 1, because it is the system-default VSAN. You can create VSANs 2 to 3839. On a device, you can create up to 16 VSANs, including the default VSAN. Examples # Create VSAN 10 and enter its view. system-view [Sysname] vsan 10 [Sysname-vsan10] 38