HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 61
fspf min-ls-interval, fspf retransmit-interval, Usage guidelines, Examples, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Usage guidelines The minimum LSR receiving interval specifies the time between receiving LSRs in a VSAN. Any LSR instances of the same LSR received within this time are dropped. This helps avoid frequent SPF calculations caused by LSDB updating. Examples # Configure the minimum LSR receiving interval as 10 seconds for VSAN 2. system-view [Sysname] vsan 2 [Sysname-vsan2] fspf min-ls-arrival 10 fspf min-ls-interval Use fspf min-ls-interval to configure the minimum LSR refresh interval for a specified VSAN. Use undo fspf min-ls-interval to restore the default. Syntax fspf min-ls-interval value undo fspf min-ls-interval Default The default setting is 5 seconds. Views VSAN view Predefined user roles network-admin Parameters value: Minimum LSR refresh interval in the range of 1 to 60 seconds. Usage guidelines The minimum LSR refresh interval specifies the interval at which LSRs are refreshed. To reduce SPF calculations and LSR flooding in a fabric caused by frequent LSR refreshing, the switch cannot refresh local LSRs within this interval. Examples # Configure the minimum LSR refresh interval as 10 seconds for VSAN 2. system-view [Sysname] vsan 2 [Sysname-vsan2] fspf min-ls-interval 10 fspf retransmit-interval Use fspf retransmit-interval to configure the LSR retransmission interval for the interface in a specified VSAN. Use undo fspf retransmit-interval to restore the default. 56