Home » HP Manuals » Servers » HP 6125XLG » Manual Viewer

HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 28

display fc timer, Views, Predefined user roles, Parameters, Examples, Syntax

Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Views Any view Predefined user roles network-admin network-operator Parameters vsan vsan-id: Displays the SCR list in the specified VSAN. The vsan-id argument is in the range of 1 to 3839. If no VSAN is specified, this command displays the SCR lists of all VSANs. Examples # Display the SCR list. display fc scr-table SCR table for VSAN 1: FCID REGISTERED FOR 0x1b0300 fabric detected rscns 0x010121 nx_port detected rscns --- Total 2 entries --- Table 10 Command output Field SCR table for VSAN FCID REGISTERED FOR Total entries Description SCR list in a specified VSAN. FC address of the N_Port. Type of Registered State Change Notifications (RSCNs) to receive: • fabric detected rscns-Receives all RSCNs sent by the switches in the fabric. • nx_port detected rscns-Receives all RSCN messages sent by N_Ports. • full detected rscns-Receives all RSCN messages. Number of SCR entries in the VSAN. display fc timer Use display fc timer to display fabric timers. Syntax display fc timer [ distributed-services | error-detect | resource-allocation ] [ vsan vsan-id ] Views Any view Predefined user roles network-admin network-operator Parameters distributed-services: Displays the distributed service timeout period, in milliseconds. 23

Section	Page
Title Page	1
Contents	3
FCoE commands	6
FCoE mode commands	6
fcoe-mode	6
VFC interface and FIP commands	7
bind interface	7
default	8
description	9
display fcoe	9
display interface vfc	10
fc mode	12
fcoe enable	13
fcoe fcf-priority	14
fcoe fcmap	15
fcoe fka-adv-period	16
fcoe global fcf-priority	16
interface vfc	17
reset counters interface	18
shutdown	18
Fabric setup commands	19
allowed-domain-id	19
display fc domain	20
display fc domain-list	21
display fc ess	22
display fc login	24
display fc name-service database	25
display fc scr-table	27
display fc timer	28
domain auto-reconfigure enable	29
domain configure enable	30
domain restart	30
domain-id	31
fabric-name	32
fc domain rcf-reject	33
fc name-service auto-discovery	34
fc timer distributed-services	34
fc timer error-detect	35
fc timer resource-allocation	36
fc wwn default-fc4-type	36
priority	38
timer distributed-services	38
timer error-detect	39
timer resource-allocation	40
wwn area-port-id	41
VSAN commands	41
display vsan port-member	41
port trunk vsan	42
vsan	43
FC routing commands	44
display fc exchange	44
display fc fib	46
display fc routing-table	47
display fspf graceful-restart	50
display fspf lsdb	51
display fspf neighbor	52
display fspf statistics	53
fc route-static	54
fspf cost	55
fspf dead-interval	56
fspf enable	57
fspf graceful-restart	57
fspf graceful-restart helper	58
fspf graceful-restart interval	59
fspf hello-interval	59
fspf min-ls-arrival	60
fspf min-ls-interval	61
fspf retransmit-interval	61
fspf silent	62
fspf spf-hold-time	63
reset fspf counters	63
FC zone commands	64
delete zone database all	64
display zone	64
display zone member	66
display zone status	67
display zone-alias	69
display zoneset	70
display zoneset active	71
member (zone view)	73
member (zone-alias view)	74
member (zoneset view)	75
zone clone	76
zone default-zone permit	76
zone name	77
zone rename	77
zone-alias clone	78
zone-alias name	79
zone-alias rename	79
zoneset activate	80
zoneset clone	81
zoneset distribute	82
zoneset distribute full	83
zoneset name	83
zoneset rename	84
NPV commands	85
display npv login	85
display npv status	86
display npv traffic-map	87
npv load-balance disruptive	88
npv traffic-map	88
FC ping commands	89
fcping	89
FC tracert commands	91
fctracert	91
Support and other resources	93
Contacting HP	93
Subscription service	93
Related information	93
Documents	93
Websites	93
Conventions	94
Command conventions	94
GUI conventions	94
Symbols	94
Network topology icons	95
Port numbering in examples	95