HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 27
display fc scr-table, Syntax
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Hard-addr: 0x000000 --- Total 2 entries --- Table 9 Command output Field FCID Type Port-WWN(vendor) Node-WWN Class Node-IP-addr FC4-types(FC4 features) Symbolic-port-name Symbolic-node-name Port-type Fabric-port-WWN Hard-addr Total entries Description FC address of the N_Port. Port type registered by the node with the switch: • 0x00(Unidentified)-No port type is registered. • 0x01(N)-N_Port, which directly connects to the fabric. • 0x02(NL)-NL_Port, which connects to the fabric through an arbitrated loop. • 0x03(F/NL)-F_Port or NL_Port. • 0x7f(Nx)-N_Port, NL_Port, or F_Port or NL_Port. • 0x81(F)-F_Port, which connects to an N_Port. • 0x82(FL)-FL_Port, which connects to an NL_Port. • 0x84(E)-E_Port, which connects to an E_Port or B_Port. • 0x85(B)-B_Port. The ports on a bridge that connect two E_Ports are called B_Ports. • 0xXX(Unknown)-Port types other than the preceding ones. NOTE: Only N_Ports and NL_Ports will be registered by a node. WWN of the N_Port (name of vendor). WWN of the node. Class of service. IP address of the node. FC4 type (feature) entries: • FC4 type-Includes SCSI-FCP, LLC/SNAP, SW_ILS, SNMP, GS3, VI, and NPV. • Feature-Includes supporting Initiator, Target, or Initiator/Target. Symbolic name, which is used for describing the N_Port. Symbolic name, which is used for describing the node. Link type of the N_Port, which can be N representing point-to-point. WWN of the F_Port. Hardware address of the N_Port. Number of entries in the VSAN. display fc scr-table Use display fc scr-table to display the State Change Registration (SCR) list of N_Ports. Syntax display fc scr-table [ vsan vsan-id ] 22