HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 81

characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an English letter. Usage guidelines Each VSAN can have multiple zone sets, but only one zone set can be effective at a time. It is called the "active zone set." The active zone set must consist of at least one N_Port member and determines access control over N_Ports. You must use this command to explicitly activate a zone set as the active zone set and distribute it to the entire fabric. When distributing the active zone set to the entire fabric, the device determines whether to carry zone database information according to the distribution type specified by the zoneset distribute full command. Examples # Create zone z1. system-view [Sysname] vsan 1 [Sysname-vsan1] zone name z1 # Add an N_Port with the FC address as 010000 to zone z1. [Sysname-vsan1-zone-z1] member fcid 010000 [Sysname-vsan1-zone-z1] quit # Create zone set zs1. [Sysname-vsan1] zoneset name zs1 # Add zone z1 to zone set zs1. [Sysname-vsan1-zoneset-zs1] member z1 [Sysname-vsan1-zoneset-zs1] quit # Activate zone set zs1. [Sysname-vsan1] zoneset activate name zs1 Related commands • display zoneset active • zoneset distribute full zoneset clone Use zoneset clone to create a zone set by copying an existing zone set. Syntax zoneset clone src-name dest-name Views VSAN view Predefined user roles network-admin 76