HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 86
display npv status
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Field Total entries Description Total number of logged-in nodes. display npv status Use display npv status to display the status of the NPV switch. Syntax display npv status [ vsan vsan-id ] Views Any view Predefined user roles network-admin network-operator Parameters vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If no VSAN is specified, this command displays the status of the switch in all VSANs. Usage guidelines You can use this command to display the status of each interface in VSANs, including VSAN tagging mode, interface state, and FC address. This command is available only when the switch is operating in NPV mode. Examples # Display the status of the NPV switch in VSAN 1. display npv status vsan 1 External Interfaces: Interface: Vfc1 VSAN tagging mode: Tagging VSAN State FCID 1 Down Number of External Interfaces: 1 Server Interfaces: Number of Server Interfaces: 0 # Display the status of the NPV switch in all VSANs. display npv status External Interfaces: Interface: Vfc1 VSAN tagging mode: Tagging VSAN State FCID 1 Down Number of External Interfaces: 1 Server Interfaces: 81