HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 56
fspf dead-interval
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
undo fspf cost vsan vsan-id Default The FSPF cost for a VFC interface is 100. Views VFC interface view Predefined user roles network-admin Parameters value: FSPF cost of the interface, in the range of 1 to 65535. vsan vsan-id: Specifies the VSAN to which the interface belongs, in the range of 1 to 3839. Usage guidelines Each link has a different cost. The route selection algorithm uses this value to determine the best route. The smaller the interface FSPF cost, the smaller the link cost. Examples # Configure the FSPF cost of interface VFC 1 in VSAN 4 as 1000. system-view [Sysname] interface vfc 1 [Sysname-Vfc1] fspf cost 1000 vsan 4 fspf dead-interval Use fspf dead-interval to configure the dead interval for the interface in a specified VSAN. Use undo fspf dead-interval to restore the default. Syntax fspf dead-interval value vsan vsan-id undo fspf dead-interval vsan vsan-id Default The default setting is 80 seconds. Views VFC interface view Predefined user roles network-admin Parameters value: Dead interval of the interface in seconds, in the range of 2 to 65535. vsan vsan-id: Specifies the VSAN to which the interface belongs, in the range of 1 to 3839. Usage guidelines After two switches establish a neighbor relationship, they send Hello packets at the Hello interval to each other to maintain the neighbor relationship. The dead interval specifies the interval during which at least 51