HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 62
fspf silent
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Syntax fspf retransmit-interval value vsan vsan-id undo fspf retransmit-interval vsan vsan-id Default The default setting is 5 seconds. Views VFC interface view Predefined user roles network-admin Parameters value: LSR retransmission interval of the interface in seconds, in the range of 1 to 65535. vsan vsan-id: Specifies the VSAN to which the interface belongs, in the range of 1 to 3839. Usage guidelines The LSR retransmission interval specifies the time to wait for an LSR acknowledgement from the neighbor before retransmitting the LSR. Examples # Configure the LSR retransmission interval for interface VFC 1 in VSAN 4 as 10 seconds. system-view [Sysname] interface vfc 1 [Sysname-Vfc1] fspf retransmit-interval 10 vsan 4 fspf silent Use fspf silent to disable FSPF for the interface in a specified VSAN. Use undo fspf silent to enable FSPF for the interface in a specified VSAN. Syntax fspf silent vsan vsan-id undo fspf silent vsan vsan-id Default FSPF is enabled on all interfaces. Views VFC interface view Predefined user roles network-admin Parameters vsan vsan-id: Specifies the VSAN to which the interface belongs, in the range of 1 to 3839. Usage guidelines With FSPF enabled, an interface can participate in the SPF calculation. To avoid SPF calculations on an interface, disable FSPF on the interface. 57