HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Command Reference - Page 41
wwn area-port-id, VSAN commands, display vsan port-member
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
wwn area-port-id Use wwn area-port-id to bind the WWN of an N_Port to an FC address in a specified VSAN. Use undo wwn area-port-id to remove the specified binding. Syntax wwn wwn-value area-port-id area-port-id-value undo wwn wwn-value area-port-id Default No binding is configured. Views VSAN view Predefined user roles network-admin Parameters wwn-value: WWN of the N_Port, in the format of xx:xx:xx:xx:xx:xx:xx:xx, where x is a hexadecimal number. area-port-id-value: Specifies the Area_ID and Port_ID in the format of xxxx, where x is a hexadecimal number. The first two digits indicate the Area_ID, and the last two digits indicate the Port_ID. Usage guidelines If you bind the WWN of an N_Port to an FC address, when the N_Port requests an FC address, the switch assigns the bound FC address to it. However, if the N_Port has been assigned another FC address or the FC address has been assigned to another N_Port, the binding is not allowed. The N-Port here indicates an N_Port on a node or an NP_Port on an NPV switch. The WWN of an N_Port can be bound to only one FC address, and vice versa. Examples # In VSAN 1, bind the N_Port (whose WWN is 33:e8:00:05:30:00:16:df) to an FC address whose Area_ID is ab and Port_ID is 12. system-view [Sysname] vsan 1 [Sysname-vsan1] wwn 33:e8:00:05:30:00:16:df area-port-id ab12 VSAN commands display vsan port-member Use display vsan port-member to display the member interfaces of a specified VSAN. Syntax display vsan [ vsan-id ] port-member 36